Replica SMG VMP-1 BLACK - 0.95J

The VORSK VMP-1 is a lightweight, all-polymer, gas-blast Airsoft submachine gun that is at home on skirmish terrain as it is CQB arena.

VORSK's mission is to provide Gas-Blow-Back excellence to the Airsoft field. Building on their vast selection of gas powered handguns, the VMP-1 is their first foray into the world of submachine guns. Announced at IWA 2023 and hitting stores this summer, the VMP has garnered a lot of attention due to its compact and lightweight design, user-friendly features and, of course, excellent GBB performance.

Ergonomic, Compact & Lightweight

Constructed from a durable, lightweight polymer, VMP-1 makes an excellent primer in CQB environments. With the stock buried in your shoulder and your hands positioned towards the front of the replica, you'll enjoy a wide yet controlled "sweep" angle, perfect for transitioning around obstacles and room clearances. These angle transitions are further enhanced by the 15° tilt mechanism installed inside the stock. This spring-centered tilt allows you to tilt your body around a corner while holding the VMP-1 upright, reducing the risk of side-sweep BBs caused by the jump curve not parallel to the ground. The stock itself is collapsible along the right edge of the VMP-1, just lift the locking mechanism and rotate it into position - "akimbo, anyone?". The pistol grip features molded stippling for a secure hold. The green fiber sights are neatly stored in the flat 20mm accessory rail. Although it's difficult to get your line of sight behind when used with the stock, the fiber-illuminated sights allow for quick and instinctive parallax aiming for quick target acquisition. The collapsible stock is integrated into an M4 Stock Tube receiver slot allowing you to retrofit your VMP-1 with an M4 stock of your choice

The perfect back-up

Built for the CQB Arena, but definitely capable of competing on the Airsoft Field. The VMP-1 when folded is only 345mm long. With the ability to replace the rear stock with an M4 QD Sling Point and spare holsters along the way, the VMP-1 is a worthy secondary explosive candidate for all Sniper/DMR setups. But that needn't be secondary when you're in the wilderness of your nearest skirmish range - the VMP-1 is capable of hitting targets with precision with a predictable flight path at +30. m and an exceptionally high ROF (rate of fire), he'll definitely get you out of a pinch when called.

48R Full-Auto Gas-Blow-Back Fun

The VMP-1 is a selective fire Airsoft submachine gun. Firing controls are all at your fingertips with the bolt release, magazine release and fire selector a finger or thumb away from your standard "on the trigger" position. Fire safety is controlled by a trigger safety that requires you to intentionally pull the full trigger before allowing the VMP to fire. Gas powered, VORSK recommends its own GBB Fuel, V6 and V8 variants for the VMP-1, along with any suitable premium Airsoft Gas. You can expect to get at least two (potentially three) cartridge magazines for each gas refill. Additional magazines are available separately, remember to purchase your matching color magazine covers to complete the look. To adjust the hop unit, the VMP-1 is supplied with a Hop-Tool wrench to adjust the hop wheel just inside the dust cover.

Walk the walk, talk the talk

Airsoft is all about immersing yourself in the aim of that day, and it helps when your tool for the day "walks and talks" like you expect it to. VMP-1 owners will enjoy all the gunplay and transitions associated with GBB replicas. The "slide-click" of magazine loading, the "slide-click-slam" of the bolt and of course the sound of 48 rounds being discharged in full automatic mode, the VMP-1 will bring a smile to any airsofter to get their hands on. he. Constructed of durable polymer, the VMP-1 is outfitted with metal fittings where required - the reinforced charging handle, tight bore 6.03mm inner barrel, Flash Hider, stock hinge and double-barreled side rails. location.

Designed for accessories

An "undressed" VMP-1 will not look as it is seen in its natural environment - the Airsoft Arena. With a full-length 20mm flat-top accessory rail, under-barrel rail, dual-slot 7-slot side rails, M4 compatible storage tube and of course the optional "Can" suppressor, the VMP-1 requires additional spare parts. accessories. Recommended spare accessories include Foregrip, Lasers/Torches, Optic Riser + RDS/Holo Sight. Barrel attachments are limited when the supplied Flash Hider is fitted as it was designed specifically for the "oversize" suppressor supplied with the "X" variant (also available separately). If you wish to install your own Flash Hiders, Suppressors or Tracer Units, simply remove the Flash Hider via its grub screws and replace it with any 14mm CCW airsoft gun attachment.

Pictograms

Airsoft ball

Blow back

Gas